USDA Forest Service, Cibola National Forest 20101115 vector digital data Albuquerque, NM Cibola National Forest This coverage was derived from the cartographic feature files (CFF's) for the Primary Base Series 7.5 minute quadrangles provided by the USDA Forest Service Geospatial Service and Technology Center (GSTC). withheld Trail This feature class consists of the trail routes on the Cibola National Forest. It is part of the USFS Southwestern Region Core Data Project. This project is designed to generate and maintain 15 vertically integrated resource data layers which are standardized across the Southwestern Region. A route feature stores the spatial locations (geography) of the trail. These feature classes have an (M) value or measure on their vertices. A route system depicts all trails within or in close proximity to an administrative unit. A trail is a linear feature constructed for the purpose of allowing the free movement of people, stock, or Off Highway Vehicles (OHV). Route measurements and route directions must correspond to those stored in the INFRA Oracle table RTE_BASICS. Associated National Application: INFRA Travel Routes INFRA Web Page: http://infra.wo.fs.fed.us/infra/ The purpose of this feature class is to depict and label the boundaries of the trail network system on this National Forest. It will be used to provide trail network information for any necessary analysis. en 2010 Most current data available within the stated time period. In work As needed -108.666208 -99.651250 36.766790 33.457451 172497.449000 978306.060000 3713858.917000 4069002.154000 None trail None Albuquerque Cibola Grants Magdalena Manzano Mount Taylor Mountainair New Mexico Sandia Southwestern Region Black Kettle Kiowa Rita Blanca None Comparison with other data sets for the same area from other time periods may be inaccurate due to inconsistencies resulting from changes in photointerpretation, rounding of decimal coordinates during conversion, and mapping conventions over time. Any hardcopies utilizing these data sets shall clearly indicate their source. If the user has modified the data in any way, they are obligated to describe the types of modifications they have performed on the hardcopy map. The user specifically agrees not to misrepresent these data sets, nor to imply that changes made were approved by the USFS. Cibola National Forest Forest Trails Staff physical address

2113 Osuna Road NE

Albuquerque New Mexico 87113 USA 505-346-3900 505-346-2663 0800 - 1700 M-F, Mountain Time 0730-1630 Monday - Friday, Mountain Time ESRI ArcCatalog 9.3.1.4000 Shapefile Accuracy and completeness was checked by manually comparing hardcopy plots, on-screen review, and reporting method with the source materials. TR_RTE_NO was populated based on information provided by the Forest Service, either in manual or digital form. An automated quality assurance/control application, QCView, was used to verify a consistent data structure and valid attribution for fields based on the "Specifications for TVA Data Automation Contract". This document can be found at: http://fsweb.r3.fs.fed.us/eng/gis/standards.html Line (arc) Data set is complete. The horizontal accuracy of the data is limited to parameters established by the 1:24000 scale of this mapping effort. The data was manuscripted and compared to the original input. If the digitized output varied by more than 1/16th of an inch, the digital line was corrected to more accurately conform to the manuscript. USDA Forest Service, Cibola National Forest 199912 Albuquerque, New Mexico Cibola National Forest Vintage 11 CFF data was updated by forest specialists using digital orthophoto quads (DOQ) as a backdrop for on-screen digitizing. Some GPS data was also added. 24000 Electronic 1995 1999 Most current data available within the stated time period. Unknown Non-CFF trail alignments USDA Forest Service, Geospatial Service and Technology Center (GSTC) Unknown Vintage 11 Vector digital data Salt Lake City, Utah USDA Forest Service, Geospatial Service and Technology Center (GSTC) Cartographic Feature Files (CFF's) are digital files containing a vector representation of the point and line features shown on a Forest Service Primary Base Series (PBS) map. CFF data are collected by digitizing PBS maps and revised using correction guide information provided by field units. GSTC began producing Vintage 11 CFF's in 1996. 24,000 electronic 1996 2000 Most current data available within the stated time period. Unknown Vintage 11 trail alignments and Forest boundary NOTE: THE FOLLOWING INFORMATION PERTAINS TO THE COVERAGE DATA MODEL Vintage 11 CFF digital data (and in some cases, Forest provided digital data) was used to create this coverage. When Forest-provided data was used, the CFF codes were conflated, as appropriate, to the Forest-provided data. Where new data existed, the Forest provided a CFF for those arcs. Source and method was populated for all arcs. The TR_RTE_NO was supplied by the Forest and populated on the respective arcs. The data set was checked for dangle errors. Errors were corrected and topology built for arc. A route subclass was created based on the item TR_RTE_NO. Beginning and ending points were applied to the route and directionality set. Technical: Approximately 95% of the time, the CFF's will be the basis for the trail data. In some instances, the Forests may have additional information (spatial and attribute) to supplement this information. The Forest may provide additional spatial data (from manuscripted, GPS or some other digital source). The RO will allow for this additional information provided the Forest has validated the data (usually with verification from an orthophoto) and can provide documentation to the validity (includes SOURCE_CODE and METHOD). The Forest may also provide a digital coverage from another vintage of CFF (Vx) in which they have previously updated. TVA will then preserve whatever information is to be retained from this data set (via the "Data Assessment") and transfer the attribute information ("matchcover" and "conflate") to the V11 data. If no information is to be provided from the Forest, TVA extracts the trails from the respective master quad coverage (using the standard list of applicable CFF's from the Data Specifications) and plots the trail data, by quad, color-coded by CFFC and sends to the Forest for review and edit. The Forest will then verify the CFFC is correct, annotate on the plots where it is to be changed, and assign a trail number for all trails within the Forest boundary and show direction (and start/stop points) for the trails. These plots are then returned to TVA and TVA makes the edits (in an extracted coverage) based on the annotation from the Forest Service. These edits include editing or adding a CFFC (in attribute CFF1-CFF10), populates the trail arcs with the Forest-provided trail number (in attribute "TRL_NO). Once all edits are complete, the original data is deleted from the master quad coverage and the new, edited data is put back into the master quad coverage. If information is provided by the Forest, TVA uses the Forest-provided data (breaks it down by quadrangle using the quad coverage as a clip cover) and compares that coverage, quad by quad, with the extracted V11 trails coverage. Editing, conflation, etc. is then done and TVA provides the color-coded by CFFC quadrangle plots for the Forest for review and editing. These plots are then returned to TVA and TVA makes the edits based on the annotation from the Forest Service. Once all edits are complete, the original data is deleted from the master quad coverage and the new, edited data is put back into the master quad coverage. At this point the trail data is complete. When the output coverage is produced in the final processing phase, a "route" will be created ("Arcroute" based on item "TRL_NO") for all numbered trails and directionality applied to those routes. 20010920 Tennessee Valley Authority Geographic Information and Engineering/USDA Project Team Leader mailing and physical address

17 Ridgeway Road

Norris Tennessee 37828 USA 865-632-1532 0800-1645 Monday - Friday, Eastern Time. Data migrated to R3 Geodatabase (Version 2-0) and loaded into ArcSDE storage format, using the Simple Data Loader in ArcCatalog. New attribute fields added from National Data Dictionary: REV_DATE, DATA_SOURCE, ACCURACY. Changes in domain values for this FC = addition of MANUAL, CONNECTED, DropMs, FLIPPED to dTransportation_Action_Values. Schema changes conform to 2008 IWEB National Data Dictionary. 20100228 USDA Forest Service, R3 RO GIS staff mailing address

333 Broadway SE

Albuquerque NM 87102 USA 505-842-3292 0800-1630, M-F Metadata imported. withheld 20101116 11134000 Vector String 0 Simple Polyline FALSE 0 FALSE TRUE coordinate pair 0.000000 0.000000 meters Universal Transverse Mercator 13 0.999600 -105.000000 0.000000 500000.000000 0.000000 North American Datum of 1983 Geodetic Reference System 80 6378137.000000 298.257222 GCS_North_American_1983 NAD_1983_UTM_Zone_13N 0.000003 Explicit elevation coordinate included with horizontal coordinates Trail Feature data set representing trails None Feature Class 0 FID FID OID 4 0 0 Internal feature number. ESRI Sequential unique whole numbers that are automatically generated. RTE_CN RTE_CN String 34 TRL_NO TRL_NO String 30 NAME NAME String 30 BMP BMP Float 19 11 EMP EMP Float 19 11 RT_ACTION RT_ACTION String 254 REV_DATE Date of feature creation or latest update. FSH6609.15 Standards for Data and Data Structures Handbook Chapter 40 date REV_DATE Date 8 ACTIONSTAM ACTIONSTAM Date 8 ACCURACY Distance (+/-), in dataset units, of expected difference between feature and real world object locations. FSH6609.15 Standards for Data and Data Structures Handbook Chapter 40 Number ACCURACY Float 19 11 DATA_SOURC DATA_SOURC String 254 SHAPE Shape Geometry 0 0 0 Feature geometry. ESRI Coordinates defining the features. Cibola National Forest GIS Coordinator mailing and physical address

2113 Osuna Rd NE

Albuquerque NM 87113 USA 505-346-3900 0800-1645, M-F, Mountain Time Trail networks The USDA Forest Service manages these data for planning purposes, not necessarily for actual on the ground implementation. The USFS is in no way condoning or endorsing the actual on the ground implementation of these data. It is the sole responsibility of the user to determine whether or not the data are suitable for the intended purpose. It is also the obligation of the user to apply these data in an appropriate and conscientious manner. The USFS provides no warranty, nor accepts any liability occurring from the use of these data. 0.000 0.000 20101116 USDA Forest Service, Southwestern Region REQUIRED: The person responsible for the metadata information. Regional GIS Coordinator Mailing and physical address

333 Broadway SE

Albuquerque New Mexico 87102 USA 505-842-3292 0800-1630 M-F, Mountain Time FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 local time http://www.esri.com/metadata/esriprof80.html ESRI Metadata Profile en http://www.esri.com/metadata/esriprof80.html ESRI Metadata Profile 20250424 11244900 FALSE 20101116 11361200 20101116 11361200 1.0 ESRI ArcCatalog 9.3.1.4000 Trail 172497.449 978306.06 4069002.154 3713858.917 1 -108.666208 -99.65125 36.76679 33.457451 1 This feature class consists of the trail routes on the Cibola National Forest. It is part of the USFS Southwestern Region Core Data Project. This project is designed to generate and maintain 15 vertically integrated resource data layers which are standardized across the Southwestern Region. A route feature stores the spatial locations (geography) of the trail. These feature classes have an (M) value or measure on their vertices. A route system depicts all trails within or in close proximity to an administrative unit. A trail is a linear feature constructed for the purpose of allowing the free movement of people, stock, or Off Highway Vehicles (OHV). Route measurements and route directions must correspond to those stored in the INFRA Oracle table RTE_BASICS. Associated National Application: INFRA Travel Routes INFRA Web Page: http://infra.wo.fs.fed.us/infra/ The purpose of this feature class is to depict and label the boundaries of the trail network system on this National Forest. It will be used to provide trail network information for any necessary analysis. Trails ISO 19115 Geographic Information - Metadata DIS_ESRI1.0 dataset 002 withheld Local Area Network 0.000 Shapefile NAD_1983_UTM_Zone_13N 0 20101116