Service Description: Pumps are put in place to power the pressure sewer systems and maintain a basic operating pressure to move the wastewater from a wet well into a location where gravity flows would be able to carry the wastewater to the Water Reclamation Facility. Locations are derived from as-built drawings and verified via coordination with field staff.Attribute Information:Field Name DescriptionOBJECTIDESRI software specific field that serves as an index for the database.FacilityIDA unique identifier for the asset class. Infor required field.InstallDateThe date when the asset was installed. Typically pulled from the as-built cover sheet for consistency. Infor required field.LifecycleStatusThe current status of the asset with respect to its location in the asset management lifecycle. Infor required field.LocationDescriptionInformation related to the construction location or project name. Infor required fieldCommentsA catch all for asset information that is irregular and doesn't warrant the creation of a new field.PumpOnThe elevation of the water level measured in feet when the pump turns on.PumpOffThe elevation of the water level measured in feet when the pump turns off.PumpOutDiaDiameter of the pipe receiving the pumped wastewater measured in inches.VFDA yes or no domained field to show if the pump is equipped with a Variable Frequency Drive.VFDSettingInformation related to the Variable Frequency Drive operation settings.PositionTextual information denoting the location of the pump in relation to the other pumps at the same lift station.LiftStationIDCommon name of the lift station where the pump is in operation.PumpNumberIntended to serve as a key field.PumpHPRated horsepower of the pump.HighHeadShutOffA predetermined value of head that once achieved deactivates the pump.DesignPointHeadFTThe amount of head the pump was designed to achieve measured in feet.DesignPointFlowGPMThe amount of flow the pump was designed to achieve measured in gallons per minute.LowHeadFTThe low tolerance for head achievd by the pump measured in feet.LowHeadFlowGPMThe low tolerance of flow at low head conditions measured in gallons per minute.PumpControlInformation related to the means of operation of the pump.PumpModelModel of the pump.LastUpdateDate when asset was most recently updated.LastEditorName of user whom most recently edited asset information.EnabledESRI software specific field related to the inclusion in a network.GlobalIDESRI software specific field that is automatically assigned by the geodatabase at row creation.ShapeESRI software specific field denoting the geometry type of the asset.created_userName of user whom created the asset.created_dateDate when the asset was created.last_edited_userName of user whom most recently edited asset information.last_edited_dateDate when asset was most recently updated.Shape.STLength()Length of the asset in feet.
Service ItemId: 5cbdc0418d3f4e09a212bd25e301375a
Has Versioned Data: false
Max Record Count: 2000
Supported query Formats: JSON
Supports applyEdits with GlobalIds: True
Supports Shared Templates: True
Replicas
All Layers and Tables
Layers:
Description: Pumps are put in place to power the pressure sewer systems and maintain a basic operating pressure to move the wastewater from a wet well into a location where gravity flows would be able to carry the wastewater to the Water Reclamation Facility. Locations are derived from as-built drawings and verified via coordination with field staff.Attribute Information:Field Name DescriptionOBJECTIDESRI software specific field that serves as an index for the database.FacilityIDA unique identifier for the asset class. Infor required field.InstallDateThe date when the asset was installed. Typically pulled from the as-built cover sheet for consistency. Infor required field.LifecycleStatusThe current status of the asset with respect to its location in the asset management lifecycle. Infor required field.LocationDescriptionInformation related to the construction location or project name. Infor required fieldCommentsA catch all for asset information that is irregular and doesn't warrant the creation of a new field.PumpOnThe elevation of the water level measured in feet when the pump turns on.PumpOffThe elevation of the water level measured in feet when the pump turns off.PumpOutDiaDiameter of the pipe receiving the pumped wastewater measured in inches.VFDA yes or no domained field to show if the pump is equipped with a Variable Frequency Drive.VFDSettingInformation related to the Variable Frequency Drive operation settings.PositionTextual information denoting the location of the pump in relation to the other pumps at the same lift station.LiftStationIDCommon name of the lift station where the pump is in operation.PumpNumberIntended to serve as a key field.PumpHPRated horsepower of the pump.HighHeadShutOffA predetermined value of head that once achieved deactivates the pump.DesignPointHeadFTThe amount of head the pump was designed to achieve measured in feet.DesignPointFlowGPMThe amount of flow the pump was designed to achieve measured in gallons per minute.LowHeadFTThe low tolerance for head achievd by the pump measured in feet.LowHeadFlowGPMThe low tolerance of flow at low head conditions measured in gallons per minute.PumpControlInformation related to the means of operation of the pump.PumpModelModel of the pump.LastUpdateDate when asset was most recently updated.LastEditorName of user whom most recently edited asset information.EnabledESRI software specific field related to the inclusion in a network.GlobalIDESRI software specific field that is automatically assigned by the geodatabase at row creation.ShapeESRI software specific field denoting the geometry type of the asset.created_userName of user whom created the asset.created_dateDate when the asset was created.last_edited_userName of user whom most recently edited asset information.last_edited_dateDate when asset was most recently updated.Shape.STLength()Length of the asset in feet.
Copyright Text: City of Bend
Spatial Reference: 102100 (3857)
Initial Extent:
XMin: -13512274.6615307
YMin: 5465744.75608208
XMax: -13491629.7221274
YMax: 5484028.6563325
Spatial Reference: 102100 (3857)
Full Extent:
XMin: -13512274.6615307
YMin: 5465744.75608208
XMax: -13491629.7221274
YMax: 5484028.6563325
Spatial Reference: 102100 (3857)
Units: esriMeters
Child Resources:
Replicas
Info
SharedTemplates
Supported Operations:
Query
ConvertFormat
Get Estimates
Create Replica
Synchronize Replica
Unregister Replica